Can You Put a Fan Light in a Shower

If you have ever taken a shower in a steamy bathroom, you know how important it is to have good ventilation. A fan light combo is the perfect solution to help clear the air and keep your space bright. But can you put a fan light in a shower?

The answer is yes!

  • Turn off the power to the shower circuit at the main electrical panel
  • Remove the old fan light unit from the shower ceiling
  • Install a new mounting bracket for the fan light unit, following the manufacturer’s instructions
  • Attach the new fan light unit to the mounting bracket and wire it according to the manufacturer’s instructions
  • Turn on the power to the shower circuit and test the new fan light unit
Can You Put a Fan Light in a Shower


-Is It Safe to Put a Fan Light in a Shower

No, it is not safe to put a fan light in the shower. The moisture from the shower can cause the electrical components in the fan light to short out, which could lead to an electrical fire.

How To Install A Bath Exhaust Fan | DIY

Fan Light in Shower

If you’re looking for a way to add some extra light and ventilation to your shower, then installing a fan light combination unit may be the perfect solution! Shower fan light units are designed to fit right into your existing shower space, and they offer both an exhaust fan and a light fixture in one convenient package. Installing a shower fan light unit is a fairly straightforward process, and it can be done in just a few hours with basic hand tools.

The first step is to remove the old exhaust fan (if there is one) from the ceiling of your shower. Once the old unit is out, you’ll need to measure the space so that you can purchase the appropriate size of replacement unit. When choosing a new shower fan light combo unit, pay close attention to the CFM rating.

This will tell you how much air the unit can move per minute, and it’s important to choose a model that offers enough power for your specific needs. Most standard sized showers will require at least 50 CFM of airflow. Once you have your new unit, simply follow the instructions included in the package for installation.

In most cases, all you’ll need to do is connect the wiring (if applicable), mount the bracket(s), and then secure the unit in place with screws or nails. Once everything is tight and secure, turn on both the light and exhaust fans to test things out!

How Close Can Exhaust Fan Be to Shower

If you have a bathroom exhaust fan, you may be wondering how close it can be to your shower. After all, you don’t want to risk getting the fan wet and damaging it. Here’s what you need to know about using an exhaust fan near your shower:

1. Make sure the fan is rated for use in a damp or wet location. Not all fans are created equal and some are not meant to be used near water. If your fan is not rated for damp or wet locations, it’s best to keep it away from your shower.

2. The further away from the shower the better. If possible, place the exhaust fan on the opposite side of the bathroom from the shower or as far away from the shower as possible. This will help minimize any moisture that gets into the motor housing and prolongs the life of your fan.

3. Use a humidity-sensing switch if available. Many newer model fans come equipped with a humidity-sensing switch which turns on automatically when moisture is detected in the air. This is a great feature if you forget to turn on the fan before hopping in the shower!

Just make sure that placement of the sensor is such that it won’t get wet itself.

Can You Put an Exhaust Fan in a Shower

An exhaust fan in a shower can help to ventilate the area and prevent mold and mildew from growing. However, there are a few things to keep in mind when installing one. First, the fan should be installed so that it is at least three feet away from any water source, such as a showerhead or tub.

Second, the fan should be vented to the outside so that moist air does not recirculate back into the room. Third, make sure that the switch for the fan is located outside of the shower area so that it cannot get wet.

Exhaust Fan in Shower Code

If you have a shower in your home, chances are you also have an exhaust fan. Chances are, you also know that this fan is important for helping to remove moisture and odors from the air in your bathroom. But did you know that there are codes and standards in place governing the installation of these fans?

The most important code for exhaust fans is the requirement that they be vented to the outside. This helps to ensure that moist air is not recirculated back into the bathroom, which can lead to mold and mildew growth. Additionally, exhaust fans must be sized appropriately for the space they are venting.

This ensures that they are effective at removing moisture from the air. When installing an exhaust fan in your shower, it is important to follow these codes and standards to help keep your bathroom safe and free of mold and mildew. If you have any questions about installation, be sure to consult with a professional contractor or electrician.


If you’re considering installing a fan light in your shower, there are a few things you should know. For one, you’ll need to make sure the housing unit is properly sealed so that moisture doesn’t damage the electrical components. You’ll also want to install a waterproof switch outside of the shower area so that you can turn the fan on and off without getting wet.

And finally, be sure to use a high-quality exhaust fan that can handle the humidity level in your bathroom. With these tips in mind, installing a fan light in your shower will be a breeze!

Leave a Comment